Taking Photos in the Rain
Several months ago (June of 2006, in fact) the light outside was perfect for macro work, but there was a problem: it was pouring rain! My camera is not even weatherproof, let alone waterproof, so I did not want to risk damaging it even for a couple of shots.
I was determined to get pictures, and was excited about the possibility of getting shots with waterdrops in them. The Weather Network for Halifax told me it would be raining for days, so I could think of only one solution - waterproof my camera! I equipped my Nikon D70s with a Nikkor 60mm Micro (with lens hood attached) and an SB-600 flash (for fill-light, if needed), then covered the entire camera in a large, clear, plastic bag.
The opening of the bag was at the bottom of the camera and I tied a knot in it there (right next to the tripod mount). I used blue mail elastics around the front of the lens hood, the front of the flash, the base of the flash, and around the viewfinder (with the eyepiece removed, there is enough of a lip there for the elastic to grab onto).
I then cut one hole for the front of the lens (I would keep the camera pointed down to keep the front lens element dry - the lens hood aided in this) and for the viewfinder. Elastics at both of these points are...
Click to continue reading "Taking Photos in the Rain"I was determined to get pictures, and was excited about the possibility of getting shots with waterdrops in them. The Weather Network for Halifax told me it would be raining for days, so I could think of only one solution - waterproof my camera! I equipped my Nikon D70s with a Nikkor 60mm Micro (with lens hood attached) and an SB-600 flash (for fill-light, if needed), then covered the entire camera in a large, clear, plastic bag.
The opening of the bag was at the bottom of the camera and I tied a knot in it there (right next to the tripod mount). I used blue mail elastics around the front of the lens hood, the front of the flash, the base of the flash, and around the viewfinder (with the eyepiece removed, there is enough of a lip there for the elastic to grab onto).
I then cut one hole for the front of the lens (I would keep the camera pointed down to keep the front lens element dry - the lens hood aided in this) and for the viewfinder. Elastics at both of these points are...
Written by admin on October 12th, 2006 with no comments.
Read more articles on DIY and macro and Flash and Camera Review.

